Canon VB-H710F User Manual

[Network] Setting Administrator Password, LAN, IP Address, DNS, etc

ting P

age

(4) [Host Name Registration with DDNS]

Select [Enable] to register the entered name server

address and host name of the camera.

(5) [Search Domain]

To specify the server used for uploading and mail

notification by host name, enter the domain name

added after the host name and then click [Add].

(6) [Search Domain List]

A list of domain names added using [Search Domain]

appears. The function queries DNS server for each

domain name starting from the top of the list.

Use the

▲▼ buttons on the right to change the order

of the domain names.

To delete a domain name, select one from the list and

then click [Delete].

Note

• Register the host name for DNS if the camera IP Address

Setting Method is [Auto (DHCP)] (p. 47). DNS server
registration settings must be set in advance. Contact your

System Administrator for the DNS server settings.

• If the name server address 1 is unavailable, the name server

address 2 will be accessed. However, the name server

address 2 must be set in advance.

SNMP

(1) [SNMP]

Set SNMP use to [Disable] or [Enable]. Camera

information can be referenced by the SNMP Manager

if [Enable] is specified.

(2) [Community Name]

Set a community name for SNMP. It is recommended

that you change the community name to ensure

system security.

(3) [Administrator Contact Information]

Set contact information (e-mail address, etc.) for the

Administrator of the camera. Setting information can

be referenced by the SNMP manager.

(4) [Administration Function Name]

Set the camera name used for administration. Setting

information can be referenced by the SNMP manager.

If left blank, the following will be used by default:

VB-H41

VB-H610

VB-H710

(5) [Installation Location]

Set information regarding the installation location of

this camera. Setting information can be referenced by

the SNMP manager.

Note

• The information set in the camera is read-only from the SNMP

manager.

• Use the SNMP Manager that supports SNMP MIB2 (supporting

RFC1213).

• Supports SNMP protocol versions v1 and v2c (v3

unsupported).

Important

Do not use “_” (underscore) in [Host Name] and [Search

Domain] in Internet Explorer 8/9.