Avaya R300 User Manual
DEFINITY Enterprise Communication Server Release 9
Getting Started with the Avaya R300 Remote Office Communicator
Getting Started with the Avaya R300 Remote Office Communicator
Issue 1
November 2000
Avaya R300 Installation and Upgrade
37
Installing the Avaya R300
3
Wall-Mount the Interconnect unit:
The plywood and the hardware to mount the plywood are installer-provided.
1. Secure a ¾ inch (2 cm.) thick sheet of 24” (61 cm.) x 4” (10 cm.) plywood to the
wall using screws. At least one side of the plywood should be secured to a framing
timber (i.e., 2 x 4) in the wall.
timber (i.e., 2 x 4) in the wall.
2. Secure the Interconnect unit to the plywood using the screws included with the
Interconnect unit.
Connect the Avaya R300 and R300 Interconnect
module
module
On the Avaya R300:
1. Slide the ejector on the Combo Blade as far to the right as possible, then gently
slide the ejector back to the left. The ejector moves about 1/8” to the left and locks
(stops) to reveal connector pins. The ejector is now correctly positioned so you can
insert the 68-pin connector. (see
(stops) to reveal connector pins. The ejector is now correctly positioned so you can
insert the 68-pin connector. (see
Figure 12.
Ejector lock in connector insertion position
SEE MANUAL
CAUTION
LAN UTP
WAN 1
WAN 2
WAN 3
CONTROL
SERIAL
LNK
DPLX
COL
100BT
TX
RX
.75”
(19 mm)
prdfmax LJK 103100