Avaya R300 User Manual
DEFINITY Enterprise Communication Server Release 9
Getting Started with the Avaya R300 Remote Office Communicator
Getting Started with the Avaya R300 Remote Office Communicator
Issue 1
November 2000
DEFINITY Administration for the Avaya R300
60
Set up signaling group
4
Set up signaling group
Each Avaya R300 has its own listen port and signaling group. Set up a new trunk group, or
use an existing trunk group administered for H.323 signaling.
use an existing trunk group administered for H.323 signaling.
Instructions
Signaling Group
Set up the signaling group for remote office:
1. Type
add signaling-group
<signaling group number or next>
and press
ENTER
to display the Signaling Group screen.
Screen 15.
Signaling Group
2. On the signaling group screen, fill in the following fields:
■
Group Type: type
H.323
.
■
Remote Office: type
y
.
■
Near-end Node Name: assign the node name assigned to the C-LAN that
supports this Avaya R300.
supports this Avaya R300.
■
Far-end Node Name: type the node name assigned to the remote office.
■
Near-end Listen Port: type a port number in the 5000-9999 range.
■
Far-end Listen Port: type 1720.
3. Press
ENTER
to save your changes.
add signaling-group 6
Page 1 of 5
SIGNALING GROUP
Group Number
6
Group Type:
H.323
Remote Office?
y
Max Number of NCA TSC: ___
Max number of CA TSC:
___
Trunk Group for NCA TSC:
___
Trunk Group for Channel Selection:
6
Supplementary Service Protocol: _
Near-end Node Name:
clan
Far-end Node Name: remote office 6
Near-end Listen Port:
5001
Far-end Listen Port:1720
LRQ Required? _
Calls Share IP Signaling Connection?
_
RRQ Required? y
Bypass If IP Threshold Exceeded?
_
Direct IP-IP Audio Connections?
_
Interworking Message: ________