Avaya R300 User Manual
DEFINITY Enterprise Communication Server Release 9
Getting Started with the Avaya R300 Remote Office Communicator
Getting Started with the Avaya R300 Remote Office Communicator
Issue 1
November 2000
Avaya R300 Administration
81
Configure Avaya R300 DNS information
5
Configure Avaya R300 DNS
information
information
Configuring DNS information is optional, but recommended. The only reason to input
DNS information is so a user can use symbolic names for servers, etc. from the diagnostic
prompt and terminal server prompt. It provides a domain name for the Avaya R300, a
primary and secondary Domain Name Server IP address, and primary and secondary
WINS IP addresses (optional). A unit can fully function without configuring DNS
information. Contact your IS department if you are unsure of the values to administer
here.
DNS information is so a user can use symbolic names for servers, etc. from the diagnostic
prompt and terminal server prompt. It provides a domain name for the Avaya R300, a
primary and secondary Domain Name Server IP address, and primary and secondary
WINS IP addresses (optional). A unit can fully function without configuring DNS
information. Contact your IS department if you are unsure of the values to administer
here.
1. From the Main Edit Menu, select Ethernet > Mod Config > DNS.
NOTE:
The DNS menu is not immediately visible from the Ethernet > Mod Config
menu. Press the down arrow until you reach the DNS menu item.
menu. Press the down arrow until you reach the DNS menu item.
2. In the Ethernet > Mod Config > DNS menu, complete the following fields:
■
Domain Name: (This is the name of the domain in which the Avaya R300
is located.)
is located.)
■
Pri DNS: (This is the IP address of the primary DNS server.)
■
Sec DNS: (This is the IP address of the secondary DNS server.)
■
Pri WINS (optional): (This is the IP address of the primary WINS server.)
■
Sec WINS (optional): (This is the IP address of the secondary WINS
server.)
server.)
|-------- MAX EDIT ------------ |--------------------| |--------------------|
|40-100 Mod Config
?? | |10-100 1234567890 ??| |30-000 Line Stat
|
| DNS...
| | L1/RA nnnnnnnnnn | |
123456789012 A
|
| >Domain Name=yourcompany.com | | 12345678901234 | | ---..........-
|
| Sec Domain Name=
| | nnnnnnnnnnnnnn | | .............- |
| Pri DNS=111.11.11.1
| |--------------------| |--------------------|
| Sec DNS=111.11.12.2
| |10-200 1234567890 ??| |00-200 15:10:34
??|
| DNS Qry Type=UDP
| | L2/DS @@@@@@@@@@
| |>M31 Line Ch |
| Allow As Client DNS=Yes
| | 12345678901234
| | Ethernet up
|
| Pri WINS=111.11.110.1
| | @@@@@@@@@@@@@@
| |
|
| Sec WINS=111.11.110.4
| |--------------------| |--------------------|
| List Attempt=No
| |40-300 WAN Stat
??| |40-400 Ether Stat ??|
| List Size=N/A
| |>Rx Pkt:
118^| |>Rx Pkt:
3486092 |
| Client Pri DNS=0.0.0.0
| | Tx Pkt:
511 | | Tx Pkt:
10056 |
| Client Sec DNS=0.0.0.0
| |
CRC:
0v| | Col:
3530 |
| Enable Local DNS Table=No
| |--------------------| |--------------------|
| Loc.DNS Tab Auto Update=N/A | |00-100 Sys Option | |40-100 Sessions
??|
| Loc.DNS Name#1=N/A
| |>Security Prof: 1 ^| |>
0 Active
|
|
| | Software +8.0.0+ | |
|
|
| | S/N: 9320027
v| |
|
Press Ctrl-n to move cursor to the next menu item. Press return to select it.
Press Tab to move to another window --- thick border indicates active window.