Bosch 1200 User Manual

1200 Series IP Video Storage System

 System Interface | en

Bosch Sicherheitssysteme GmbH

Installation Manual

DOC | V1 | 2010.08

There are several LEDs on the control panel as well as others on the drive carriers to keep you 

constantly informed of the overall status of the system as well as the activity and health of 

specific components. The 1200 Series has a power on/off switch, located on the control 

panel. This chapter explains the meanings of all LED indicators and the appropriate responses 

you may need to take. 

Power: The main power button is used to apply or remove power from the power supply to 

the system. When the power is on, the power button will be lighted by a blue LED. Turning off 

the system power with this button will cause the blue LED to turn off and will remove the 

main power, but will keep standby power supplied to the system. Therefore, you must unplug 

system before servicing the system.

The control panel located on the front of the 1200 Series chassis has three LEDs. These LEDs 

provide you with critical information related to different parts of the system. This section 

1

All-in-One Card Reader

2

NIC  LED

3

HDD LED

4

OH LED

5

Power Button