Bosch NBN-921 User Manual

DinionHD 720p IP Camera

Advanced Mode | en 105

Bosch Security Systems

Installation and Operation Manual

AR18-10-B013 | v1.52 | 2011.06

Save individual JPEG images on an FTP server at specific 

intervals. If required, retrieve these images at a later date to 

reconstruct alarm events. JPEG resolution corresponds to the 

highest setting from the two data streams.

Select how file names are created for the individual images that 

are transmitted.

–

Overwrite: The same file name is always used and any 

existing file will be overwritten by the current file.

–

Increment: A number from 000 to 255 is added to the file 

name and automatically incremented by 1. When it reaches 

255, it starts again from 000.

–

Date/time suffix: The date and time are automatically 

added to the file name. When setting this parameter, 

ensure that the date and time of the device are always set 

correctly . For eample, the file snap011010_114530.jpg 

was stored on October 1, 2010 at 11.45 and 30 seconds.

Enter the interval in seconds at which the images are sent to an 

FTP server. Enter zero for no images to be sent.

Enter the IP address of the FTP server on which to save the 

JPEG images.

Enter your login name for the FTP server.

Enter the password that gives access to the FTP server.

Enter an exact path to post the images on the FTP server.

Enter a limit for the data rate in kbps.