Bosch NBN-921 User Manual

en | Basic Mode

DinionHD 720p IP Camera

AR18-10-B013 | v1.52 | 2011.06

Installation and Operation Manual

Bosch Security Systems

Re-enter the new password to ensure that there are no typing 

mistakes.

The new password is only saved after clicking Set. Therefore, 

click Set immediately after entering and confirming the 

password, even if assigning a password at another level.

If there are multiple devices operating in the system or 

network, it is important to synchronize their internal clocks. For 

example, it is only possible to identify and correctly evaluate 

simultaneous recordings when all devices are operating on the 

same time. Device time, date and time zone are shown.

–

Click Sync to PC to apply the system time from your 

computer to the device.

The camera can receive the time signal from a time server using 

various time server protocols and then use it to set the internal 

clock. The device polls the time signal automatically once every 

minute. Enter the IP address of a time server.

Select the protocol that is supported by the selected time 

server. It is recommended to select the SNTP server protocol. 

This protocol provides high accuracy and is required for special 

applications and future function extensions. Select Time server 

if the server uses the RFC 868 protocol.

It is important to ensure that the date/time is correct for 

recording. An incorrect date/time setting could prevent correct 

recording.