Bosch NBN-921 User Manual

en | Advanced Mode

DinionHD 720p IP Camera

AR18-10-B013 | v1.52 | 2011.06

Installation and Operation Manual

Bosch Security Systems

Profiles can be configured for use with the H.264 settings of 

encoder streams. Select a profile by clicking the appropriate 

tab. Change the name of a profile and individual parameter 

values within a profile.

Profiles are rather complex. They include a number of 

parameters that interact with one another, so it is generally 

best to use the default profiles. Only change a profile if 

completely familiar with all the configuration options.

The parameters as a group constitute a profile and are 

dependent on one another. If a setting outside the permitted 

range for a parameter is entered, the nearest valid value is 

substituted when the settings are saved.

Enter a new name for the profile here. (Do not use any special 

characters, for example &.)

To optimize utilization of the bandwidth in the network, limit 

the bit rate for the camera. The target bit rate should be set 

according to the desired picture quality for typical scenes with 

no excessive motion.

For complex images or frequent changes of image content due 

to frequent movements, this limit can temporarily be exceeded 

up to the value entered in the Maximum bit rate field.

This maximum bit rate is not exceeded under any 

circumstances. Depending on the video quality settings for the 

I-frames and P-frames, this can result in individual images being 

skipped.

The value entered here must be at least 10% higher than the 

value entered in the Target bit rate field. If the value entered 

here is too low, it is automatically adjusted.

The Encoding interval slider determines the interval at which 

images are encoded and transmitted. This can be particularly