Bosch NBN-921 User Manual

DinionHD 720p IP Camera

Advanced Mode | en

Bosch Security Systems

Installation and Operation Manual

AR18-10-B013 | v1.52 | 2011.06

Define up to ten different recording profiles here, then assign 

these to individual days or times of day on the Recording 

Scheduler page. Modify the names of the recording profiles on 

the tabs in the Recording Scheduler page.

1.

Click a tab to edit the corresponding profile.

2.

If necessary, click Default to return all settings to their 

defaults.

3.

Click Copy Settings to copy the currently visible settings 

to other profiles. A window opens to select the target 

profiles for the copied settings.

4.

For each profile, click Set to save.

Select the profile setting that is to be used for each data stream 

when recording. (The properties of the profiles are defined on 

the Encoder Profile page.)

The profile selected is used for the stream instead of the Non-

recording profile selected on the Encoder Streams page.

Specify whether, in addition to video data, audio or metadata 

(for example alarms or VCA data) should also be recorded. 

Including metadata could make subsequent searches of 

recordings easier but it requires additional memory capacity. 

Without metadata, it is not possible to include video content 

analysis in recordings.

Select the mode for standard recordings:

–

Continuous: the recording proceeds continuously. If the 

maximum memory capacity is reached, older recordings 

will automatically be overwritten.

–

Pre-alarm: recording takes place in the pre-alarm time, 

during the alarm and during the post-alarm time only.

–

Off: no automatic recording takes place.

In the Stream list box, select Stream 1, Stream 2 or I-frames 

only for standard recordings.