Petsafe Dog Kennel User Manual

8 

1. Starting from the fi rst post away from the gate, use a hammer to stretch 

the fabric as shown. 

2. Stretch fabric as tightly as possible. Add tie wires to posts to hold the 

stretched fabric. 
Important: Be sure all tie wires are on the same picket (wire) or 
the fabric will be crooked. 

3. Stretch and tie to the next post, until you go all the way around. Don’t tie 

the last post (at the gate).

________________________________________________________________________________________________

1. Gather 5 clips and 1 tension rod. 
2. Stretch the fabric as tightly as possible to the last post and select a fabric 

wire to cut, allowing 4 ½" for the tension rod and clips (9A). 

3. Cut the fabric by holding the fabric loosely while you spin one of the pickets out.

a. Undo the knuckle at the top and the knuckle at the bottom of the 

same picket (9B).

b. Unweave that picket by spinning it out (9C). Be careful! Wire ends 

are sharp. 

c. Install the tension rod (9D) and 5 clips (9E).

4 

1

/

2

"

Remove this picket

8

9