Petsafe Cottageview Dog Kennel User Manual

4 

By using all 4 panels, you can expand your Cottageview Dog Kennel

™

 to one of two traditional sizes:

1. Using a wrench, remove the two kennel clamps that are 

attached to the wire mesh of each of the kennel panels ( 2A).

2. Remove the SunBlock Top

™

 from the kennel by using wire 

cutters to cut the cable ties. Note: for 5 ft. x 10 ft. set up you 
can remove the cable ties from only one side of the SunBlock Top. 
This will allow your dog to receive partial sun protection.

3. Using a wrench, loosen the kennel clamps so the kennel 

panels can be disassembled to make room for the 
expansion panels.

4. Using a wrench and two of the supplied kennel clamps, 

attach expansion panel to the kennel. Position one clamp 
approximately 4 inches from the top of the kennel and 
one clamp approximately 6 inches from the bottom of the 
kennel. For the safety of your dog, attach clamp so that 
nut is on the outside of the kennel. See (2B) for clamp and 
panel orientation.

5. Continue connecting remaining expansion panels using 

wrench and two clamps per connection.

1

2