Pelco NET5308T-EXP User Manual
C2655M-A (10/08)
7
Before You Begin
Endura is a network system that requires a continuous amount of bandwidth to transmit true, live video. Therefore, always include your network
administrator when planning and installing Endura components.
administrator when planning and installing Endura components.
You will also need the following items:
•
Pelco-approved Endura certification
•
Power source (110/220 VAC)
•
Up to eight analog video devices (fixed or PTZ camera)
•
One or more NTSC or PAL monitors (one for installation; one or more if using looping video)
•
Line-in audio source (if using audio)
•
Phillips screwdriver
•
Small flat-tip screwdriver (if connecting relays or alarms)
•
A NET5300B base module with access to an Endura network
–
that is an active, Gigabit Ethernet network that supports the full Internet Protocol suite,
–
that is configured with at least one NVR5100 Series network video recorder or other Endura video recorder, and
–
that is configured with at least one Endura workstation
NOTE: These network requirements represent the minimum standard for a small Endura-capable security network. Please consult the Endura
Network Design Guide (C1640M) to make sure your network is properly configured. Your system may be different and may require additional
hardware, software, and network resources.
Network Design Guide (C1640M) to make sure your network is properly configured. Your system may be different and may require additional
hardware, software, and network resources.
PARTS LIST
Qty Description
1
NET5308T-EXP multichannel video encoder module
1
Accessory pack:
2
2
Terminal blocks, 8-pin (for alarms)
2
Terminal blocks, 6-pin (for relays)
3
Power cords (1 USA standard, 1 European standard, and 1 UK standard)
2
Front bezel keys
1
Rack mount kit (included with accessory pack):
2
2
Chassis mounting brackets with thumbscrews
6
Screws, 6-32 x 0.25-inch, Phillips flat head (three for each bracket)
2
Adjustable support rail sets (each set includes one front-mounting rail and one rear-mounting rail)
6
Screws, 8-32 x 0.375-inch, Phillips truss head (three for each support rail)
4
Screws, 10-32 x 0.5-inch, Phillips flat head (two for each front rail)
4
Screws, 10-32 x 0.5-inch, Phillips pan head (two for each rear rail)
10
Cage nuts, 10-32
3
Product serial number labels (attached to unit)
1
NET5308T-EXP Installation manual (C2655M)
1
Safety instructions (C604M)