Plasmon LF 8600 User Manual

 

1. Open the media access door and manually move the shuttle all the way to the left.and insert 

the foam shipping block to hold it in place.  Close the media access door.

2. Remove the LF 8600 chassis with its bezel from the Rack Mount configuration by reversing 

the procedure detailed in the Installation and De-installation section. The bezel extends 
below the chassis; ensure that you do not place the unit flat on a hard surface, thereby 
damaging the bezel.

3. Ensure that the lower packing material is positioned to form a rectangular frame for the 

LF 8600 chassis which opens to the front.

4. Place the bezel relief cushion on the pallet so that it will support the chassis just behind the 

bezel.

5. Place the LF 8600 into the foam frame so that the drive rests on the bezel relief cushion and 

the bezel bears no weight.

6. Place the lower front foam cushion between the carton and the front of the LF 8600.  Place the 

ESD protective packing material on top of the drive.