Plasmon LF 8600 User Manual

 

The Drive Operator Console (DOC) shown in the figure below, is located on the front panel of the LF 8600.
The DOC provides the controls and indicators that enable a user to operate the LF 8600. The DOC
controls and indicators consist of an alphanumeric display, a LOAD/MENU switch, a TEST/SELECT
switch, and a WRITE PROTECT indicator. Refer to the table below for a description of the DOC controls
and indicator.

Displays operating, configuration and test status messages

In operating mode, the LOAD/MENU switch controls the loading and unloading of 
media cartridges.  In Configuration mode, the LOAD/MENU switch steps through the 
menu of configurable parameters.

In operating mode, the TEST/SELECT switch invokes the diagnostic self-test. In 
Configuration mode, the TEST/SELECT switch scrolls through the options available 
for each configurable parameter.

The WRITE PROTECT indicator illuminates when either the Write Protect (WRT 
PROT) configuration option is enabled or a media cartridge WRITE PROTECT switch 
is locked (write disabled). The WRITE PROTECT indicator will flash when an RTPM 
condition occurs. Also, the WRITE PROTECT indicator will flash when the drive or the 
media is in a read only condition.