Barco ATLAS 67 CS4 User Manual
R5976255
A
TLAS
CS4 (2001-03)
4-2
4.1 Control Unit
4.1.1 Power, source and communic ation connections [3]
1
Power switch
1 = on, 0 = off
2
Power input
autoranging from 100VAC to 240VAC
3
Video input
1 cinch or 1 BNC connector, no loop through
4
S-Video
4-pin mini-DIN
5
SDI and SDO
2× BNC terminals, serial digital input and loop through
output
output
6
IEE 13994
not yet implemented
7
TRIG
(mini-jack) output voltage of 5V when projector is on
8
Mouse
(DIN 13) mouse output to be connected to the mouse
input of a computer. The computer can now be con-
trolled via the Executive Remote Control Unit
input of a computer. The computer can now be con-
trolled via the Executive Remote Control Unit
9
RS232 IN
(D9), to allow communication with external computer,
e. g. IBM PC or compatible, MAC ..
e. g. IBM PC or compatible, MAC ..
10
RS232 OUT
(D9), used to connect to next projector, RS232 IN plug
11
Communication port
(D9), allows communication with the 800 peripherals
12
IR-Acknowledged
IR-Received
IR-Received
IR-Signals are recognized
IR-Signals are received but not recognized by the pro-
jector
IR-Signals are received but not recognized by the pro-
jector