Barco ATLAS 67 CS4 User Manual

Page of 111
R5976255
     
A
TLAS
 CS4 (2001-03)
7-2
7.1 Adjustment mode
You are now in the 
'Adjustment Mode'
.
The cursor key (
RCU
) or 
'+
 or 
'-'
 keys (local 
keypad
) are used to make 
menu
 selections and also
for adjustments.
The 
ENTER
 and 
EXIT
 keys are used to move forward and backward through the 
menu
 structure.
The 
ADJUST
 key can be used to terminate the adjustment mode while any path selection menu
is displayed.
There are 3 possible paths to follow once in the 
Adjustment Mode
. They are:
Installation
Installation should be selected if a new input module is installed or a new source is connected
to an existing input module.  Also when the projector is relocated in a new configuration.
Random Access
Random Access should be selected to set up a new source.
Service
Service should be selected if the user intends to change general settings such as password, lan-
guage, address, etc.or some service actions as reset lamp run time, panel adjustments, etc. or
get set-up information.
Some items in the 
Adjustment
 mode are password protected.  While selecting such an item, the
projector asks to enter your password (Password protection is only available when the password
strap on the controller module is 
ON
, call an authorized service center to change the position of the
password strap).
7.1.1 Password
The password contains 4 digits.
Enter the digits with the numeric keys.
Example: 2 3 1 9
The first digit position is highlighted. Enter with the numeric keys. The highlighted square jumps
to the next position. Continue until all 4 digits are filled in.
When your password is correct, you gain access to the selected item.
When your password is wrong. the error message "Invalid password" is displayed on the screen.
Press 
EXIT
 to continue and to return to the 
Service menu
.
The factory programmed password is 0 0 0 0
Once the password is correctly entered, all other password protected items are accessible without
re-entering the password.
When re-entering the 
Adjustment
 mode, it will be necessary to enter the password again when se-
lecting a password protected item.
For setting up your own password see chapter