Petsafe RFA-200 User Manual

 

www.petsafe.net 9 

Read all steps before attempting to set the 
Correction Level.
1. Remove the clear plastic cover with a coin to 

expose the Correction Level Button (5D).

2. With the battery installed, press the 

Correction Level Button and release when 
the Receiver LED Indicator Light lights up 
(5E).

3. The Receiver LED Indicator Light will 

emit a series of fl ashes representing the 
Correction Level.

4. Increase the Correction Level by pressing 

and releasing the Correction Level Button 
within 5 seconds of the previous series of 
fl ashes.

5. After setting the Correction Level,  replace 

the cover to protect the Correction Level 
Button.

The Correction Levels increase in strength from 1 to 5. Pushing the Correction Level Button while the Collar 
Receiver is on level 5 will cause the Collar Receiver to revert to level 1. Refer to the Function and Response Table to 
choose the Correction Level that best fi ts your pet.

The Collar Receiver is equipped to automatically increase the level of Static Correction the longer your pet remains 
in the Static Correction Zone if the collar is set at level 2 or above.

The Receiver LED Indicator Light acts as a low battery indicator, fl ashing every 4 to 5 seconds when replacement is required.

1 Flash

1

Beep and Vibrate (No Static Correction)

2 Flashes

2

Low Static Correction

Timid

3 Flashes

3

Medium Static Correction

Timid or Average

4 Flashes

4

Medium High Static Correction

Average or High Energy

5 Flashes

5

High Static Correction

High Energy

Flashes once every 
4 to 5 seconds

Low Battery

 Note: Begin training with Correction Level 2 and only increase if your pet does not respond to the Static Correction.