Barco ATLAS 84 CS4 User Manual
R5976255
A
TLAS
CS4 (2001-03)
13-2
13.1 Floor Space And Maintena nce Area
Sufficient floor space and maintenance area must be available when installing A
TLAS
CS4
Floor Space
The floor space must have a sufficient load carrying capacity and be sufficiently flat (according to
DIN 18202). It must not sag by more than 1 millimeter under the load of the A
DIN 18202). It must not sag by more than 1 millimeter under the load of the A
TLAS
CS4. A ce-
ment, wood or false floor is permissible.
The load of the A
The load of the A
TLAS
CS4 is transmitted to the floor via adjustable feet.
No installations (venting ducts, sockets etc.) must be present in the floor in the area of the feet or
of the lower anchoring devices. An area of at least 15 centimeters must be kept free around each
foot. The loading capacity in the area of the feet must be sufficient. Height differences up to
±5 millimeters can be compensated using the adjustable feet.
of the lower anchoring devices. An area of at least 15 centimeters must be kept free around each
foot. The loading capacity in the area of the feet must be sufficient. Height differences up to
±5 millimeters can be compensated using the adjustable feet.
A
TLAS
67 CS4
front
side
top
1335
154.5
752,5
Figure 13-1
Position of the feet of A
TLAS
67 CS4
(All dimensions measured in millimeters!)