TEAC LP-P1000 User Manual

  Stop (8) button

Press to stop CD playback.

  Play/pause (y/9) button

Press when the CD or a supported Bluetooth device 
is stopped or paused to start playback.
Use this button to pause playback during playback.

  Open/close button (-)

Press to open and close the disc tray.

Use to adjust the volume. Turn right to raise the vol-
ume and left to lower it. 

When you use headphones, first reduce the volume 
level to minimum. Then, insert the plug from your 
headphones into the PHONES jack, and turn the 
volume up gradually by turning the VOLUME knob.

 

o

Do not turn the unit on and put it into standby 
or connect and disconnect the headphones plug 
while wearing headphones. 
(Doing so could cause loud noise to be output 
from the headphones.)

 

o

When a plug is in the headphones jack, no sound 
will be output from the speakers.

Use to input analog audio signals. 
To connect the headphones jack of a portable 
music player or similar device to the unit, use the 
included stereo mini plug cable to connect it to the 
front panel analog audio input jack (AUX 2 IN). In 
this case, adjust the volume on the portable music 
player. Be careful, however, because turning the 
volume of the portable music player up too much 
could cause distortion. 

Signals sent from the remote control are received 
here. When using a remote, point it toward this 
spot.

This shows the track number, time, FM/AM fre-
quency and other information.

(MULTI JOG/. //j k)

Use when tuning the radio to select stations (page 
49).

Use this also to set the current time and the wakeup 
timer (pages 25 and 52).

When listening to a CD, use to skip to the previous 
or next track (page 33).

Place the speakers as desired.