TEAC LP-P1000 User Manual

 

o

When using the remote control, point it toward the 
remote control signal receiver on the main unit from 
a distance of 5 m (16 ft) or less. Do not place obstruc-
tions between the main unit and the remote control.

 

o

The remote control might not work if the remote 
control signal receiver on the main unit is exposed to 
sunlight or bright lights. In this case, try moving the 
main unit.

 

o

Beware that use of this remote control could cause 
the unintentional operation of other devices that can 
be controlled by infrared rays.

Remove the cover from the back of the remote control. 
Insert two AA batteries into the compartment accord-
ing to the +/− indications. Then, close the cover. 

If the distance required between the remote and main 
unit decreases or if the unit stops responding to the 
remote buttons, replace both batteries with new ones.
Dispose of the used batteries according to the instruc-
tions on them or requirements set by your local 
municipality.

V

Misuse of batteries could cause them to rupture or 
leak, which might result in fire, injury or the stain-
ing of nearby materials. Please read and observe 
the precautions on page 3 carefully.