TEAC LP-P1000 User Manual
26
Setting the clock (2)
6
Press the CLOCK ADJUST button.
Display example
The minute value blinks.
7
Press the TIME (j/k) buttons to set
the current minute.
the current minute.
8
Press the CLOCK ADJUST button.
This completes the procedures for setting the time.
The clock will start from the set minute at 0 seconds.
o
The unit’s clock and wakeup timer settings will be
erased if a power outage occurs or the power cord is
unplugged from an outlet.
erased if a power outage occurs or the power cord is
unplugged from an outlet.
Current time display
The clock is always shown when the unit is in standby
mode (off ) and when the function is set to PHONO/
AUX.
mode (off ) and when the function is set to PHONO/
AUX.
Press the remote control's DISPLAY button to show the
clock on the display.
clock on the display.
o
The current time is shown for three seconds in CD
and FM/AM modes.
and FM/AM modes.
Display example
Current time
o
The DISPLAY button does not function in AUX/
PHONO and Bluetooth modes.
PHONO and Bluetooth modes.
o
In Bluetooth mode, the current time is only shown
when paired.
when paired.