TEAC LP-P1000 User Manual
56
Listening to a connected device
You can connect the audio output jack or headphones
jack of a portable audio player or other device to this
unit and listen to its audio playback through this unit.
jack of a portable audio player or other device to this
unit and listen to its audio playback through this unit.
1
Use the included stereo mini plug
cable to connect the front panel analog
audio input jack (AUX 2 IN) with the
headphones jack (or audio output jack)
of a portable audio player or other
device.
cable to connect the front panel analog
audio input jack (AUX 2 IN) with the
headphones jack (or audio output jack)
of a portable audio player or other
device.
2
Press the PHONO/AUX button to select
“AUX”.
“AUX”.
3
Start playback on the playback device.
Then, adjust the volume of both this
unit and the connected device.
Then, adjust the volume of both this
unit and the connected device.
o
If the volume is not raised on an audio player
when its headphones jack is connected to this
unit, no sound will be output from this unit.
when its headphones jack is connected to this
unit, no sound will be output from this unit.
o
If you raise the volume level of the connected
device too high, the sound might distort. If this
occurs, lower the volume of the connected
device until distortion stops and then adjust the
volume on this unit.
device too high, the sound might distort. If this
occurs, lower the volume of the connected
device until distortion stops and then adjust the
volume on this unit.
There are analog audio input jacks on both the front
and rear panels.
If cables are connected to both the front panel (AUX
2 IN) and the rear panel (AUX 1 IN) jacks, the audio
input through the front panel jack (AUX 2 IN) will be
used. If nothing is connected to the front panel jack
(AUX 2 IN), the audio input through the rear panel
jack (AUX 1 IN) will be used.
and rear panels.
If cables are connected to both the front panel (AUX
2 IN) and the rear panel (AUX 1 IN) jacks, the audio
input through the front panel jack (AUX 2 IN) will be
used. If nothing is connected to the front panel jack
(AUX 2 IN), the audio input through the rear panel
jack (AUX 1 IN) will be used.