Raymarine Pathfinder Radar RL70C PLUS User Manual
Chapter 5: Standard Chart Operations
5-23
Clear
in
g th
e
Cu
rren
t
Rou
te
You can use a Navigator Keypad (see Using the ST60 or ST80 Navigator
Keypad on page 5-15) to name the route.
Keypad on page 5-15) to name the route.
5. Press ENTER to finish and clear the Name List, or press CLEAR to cancel
the operation. To return to the default soft key display, press ENTER again.
Clearing the Current Route
You can clear the current route from the screen. When you select CLEAR ROUTE
if the current route has not been saved, you have the option of saving it and, if
you are following the current route, you have the option to stop.
if the current route has not been saved, you have the option of saving it and, if
you are following the current route, you have the option to stop.
➤ To clear the current route:
1. Press the ROUTE default soft key or place the cursor over a route leg until
the text RTE is displayed.
Press the CLEAR ROUTE soft key.
Press the CLEAR ROUTE soft key.
2. If you are following the current route the STOP FOLLOW soft keys are dis-
played.
To cancel the CLEAR operation press NO.
To stop following and clear the route press YES.
To cancel the CLEAR operation press NO.
To stop following and clear the route press YES.
3. If the route has not been saved the SAVE ROUTE soft keys are displayed.
To clear the route, without saving it in the route database, press NO.
To save the route in the database, press YES. The Name route soft keys are
displayed and you should continue as described in the previous section,
Saving the Current Route on page 5-22.
To save the route in the database, press YES. The Name route soft keys are
displayed and you should continue as described in the previous section,
Saving the Current Route on page 5-22.
The current route is cleared from the screen and the default soft keys are
displayed. You can now use the ROUTE soft keys to make a route, or to show
another route from the database.
displayed. You can now use the ROUTE soft keys to make a route, or to show
another route from the database.
Retrieve a Route From the Database
You can select a route as the current route from the database list. The list is
accessed from the second set of ROUTE soft keys.
accessed from the second set of ROUTE soft keys.
➤ To select a route as the current route:
1. Press the ROUTE soft key, followed by MORE, then press ROUTE LIST. The
route list is displayed as illustrated in Figure 5-7. The selection bar indi-
cates the selected route.
cates the selected route.
2. Use the trackpad to select the required route then press the SHOW ROUTE
soft key. The chart is re-drawn at a scale suitable to display the whole route.
ROUTE
RTE
STOP
FOLLOW
SAVE
ROUTE
ROUTE
SHOW
ROUTE