Raymarine Combined Pathfinder Radar User Manual

Chapter 9: Maintenance and Problem Solving

9-3

Resetti

ng th

e System

There are three types of reset available for the display:

•

Factory Reset: This resets all values back to their original factory settings.

•

Power-On Reset: When you turn the display off and on again, the screen 
reverts to the fishfinder or chart picture with all windows cleared. 

•

Picture Reset: Press and hold the DISPLAY key for two seconds to return 
the screen to the full-screen picture of the top window with all windows 
cleared.

At power-on, the last-used values are retained for all the options, except for 
those listed in the following table which are reset to the factory default each 
time.

➤ To perform a factory reset:

1. Press MENU.

2. Press the SYSTEM SET UP soft key to display the System Set Up page (see 

Section 7.3 for details).

3. Press and hold MENU for 5 seconds.

A countdown timer is displayed. If you release the MENU key before the 
timer reaches zero, the reset is not performed.

When the reset request has been accepted, the system restarts.

The factory default settings are listed in Section 7.3

Table 9-1:

Power On Default Settings

Heading Mode
Rain
FTC
Alarm
Zoom
Windows
Brightness

Head Up (radar); North Up (chart)
OFF (but value stored) – radar only
OFF (but value stored) – radar only
ON, with last-used value
OFF
OFF
ON at 100%.