Pioneer AVH-P4100DVD User Manual

•  Check all connections and systems before final 

installation.

•  Do not use unauthorized parts. The use of 

unauthorized parts may cause malfunctions.

•  Consult with your dealer if installation requires 

drilling of holes or other modifications of the 

vehicle.

•  Do not install this unit where:

— it may interfere with operation of the vehicle.

—  it may cause injury to a passenger as a result 

of a sudden stop.

•  Do not install the display where it may (i) obstruct 

the driver’s vision, (ii) impair the performance of 

any of the vehicle’s operating systems or safety 

features, including air bags, hazard lamp buttons 

or (iii) impair the driver’s ability to safely operate 

the vehicle.

•  The semiconductor laser will be damaged if it 

overheats. Install this unit away from hot places 

such as near the heater outlet. 

•  Optimum performance is obtained when the unit 

is installed at an angle of less than 30°.

•  To some types of vehicles, this unit cannot be 

properly installed. In such case, use the optional 

installation kit (ADT-VA133).

Position the unit so that its screw holes are 

aligned with the screw holes of the bracket, 

and tighten the screws at 3 or 4 locations on 

each side.

  In some types of vehicles, discrepancy may 

occur between the unit and the dashboard. If this 

happens, use the supplied frame to fill the gap.

Factory radio 

mounting bracket

If the pawl gets in the way, 

bend it down.

Dashboard or console

Binding screw or 

flush surface screw

Be sure to use the 

screws supplied 

with this unit.