Pelco C1665M-A (1/06) User Manual
C1665M-A (1/06)
3
Description
The TW3004P is a four-channel passive video transceiver that can transmit multiple video signals over
unshielded twisted pair (UTP) cable. The transceiver can be mounted into a fiber rack (RK5000PS-3U/
RK5000-3U). Each transceiver has four rubber feet for placement on a flat surface, such as a desk or
shelf.
unshielded twisted pair (UTP) cable. The transceiver can be mounted into a fiber rack (RK5000PS-3U/
RK5000-3U). Each transceiver has four rubber feet for placement on a flat surface, such as a desk or
shelf.
The transceiver can be used at the camera and/or monitoring location. It allows for easy connectivity
with any video source or destination device, such as cameras, monitors, and matrix switchers. This
multichannel transceiver will transmit video (color/black-white) and Coaxitron
with any video source or destination device, such as cameras, monitors, and matrix switchers. This
multichannel transceiver will transmit video (color/black-white) and Coaxitron
®
(up-the-coax) PTZ
control signals on the same pair of UTP wires.
Although the transceiver is passive and requires no power, the Pelco badge on the front of the unit illu-
minates when inserted into a fiber rack. The transceiver has built-in surge suppression.
minates when inserted into a fiber rack. The transceiver has built-in surge suppression.
PARTS OF THE TRANSCEIVER
Figure 1. TW3004P Parts
Pelco
Badge
BNC
Connector
(4)
4-Pin Power Connector
Rubber
Feet
(4)
8-Pin Terminal Block Connector
1
2
3
4