Pelco 500 Series User Manual
14
C2937M-A (5/07)
1. POWER: Turns on or off power to the monitor.
2. (input source): Displays all the available input sources. Press the button to select the desired input source.
3. SCAN: Changes the scan mode of the screen (4:3, 14:9, Over Scan, 16:9).
4. BLUE ONLY: Turns off the red and green colors on the screen to allow color adjustment using professional calibration tools.
5. COLOR TEMP: Adjusts the color temperature (Kelvin) of the screen.
6. MENU/EXIT: Displays/exits the on-screen menu.
7. AUTO: Selects auto adjustment of the screen in RGB mode.
8. MUTE: Temporarily silences the sound. To return the sound: press MUTE again, VOL UP, or VOL DOWN.
9. (volume up/down): Controls the cursor in the on-screen menu, and also adjust the volume up or down.
10. (enter): Confirms (store or enter) your choice in the on-screen menu.
11. (PIP): Controls the PIP (picture-in-picture) as follows:
•
PIP ON/OFF: Activates/deactivates PIP mode. It also cycles through POP 4:3 and POP 16:9 while in RGB and DVI modes.
•
P.SIZE: Selects the size of the subpicture.
•
P.SWAP: Swaps the main and subpicture.
•
P.INPUT: Selects an input source for the subpicture.
•
P.LOCATION: Selects a location for the subpicture.
•
SOUND SEL: Adjusts the sound of the main or subpicture.
12. STILL: Freezes the current picture. (If used while in PIP or POP, the sub picture is frozen, not the main picture.)
13. 4:3/16:9: Swaps the picture between 4:3 mode and 16:9 mode.
14. (key lock): Prevents unauthorized operation of the equipment by locking the buttons on the front panel. Only the buttons on the remote
control can be used.
MENUS
The menus are the same for the PMCL523, PMCL526, PMCL532, PMCL537, and PMCL542. Since different options are available for different input
types, some options may be unavailable and will be dimmed.
types, some options may be unavailable and will be dimmed.
To use the menus:
1. Press the MENU button to access the Main menu.
2. Use the up and down arrow buttons to highlight a selection.
3. Press the MENU button to select an item.
4. Use the volume left and right arrow buttons to adjust the setting on a selected item.