Pelco 500 Series User Manual
18
C2937M-A (5/07)
RGB/DVI Mode Menu Field Definitions
NOTE: You cannot change the language on this menu. You must use the Video1, Video2, S-Video, Component Mode Menu to change the
language. The language will then be changed for both menus.
language. The language will then be changed for both menus.
Input: Select RGB or DVI.
Contrast: Adjusts black level of the video screen image (0 to 100).
Brightness: Adjusts white level of the video screen image (0 to 100).
H-Position: (RGB only; dimmed in DVI mode.) Adjusts the horizontal position (-35 to +35).
V-Position: (RGB only; dimmed in DVI mode.) Adjusts the vertical position (-15 to +15).
Frequency: (RGB only; dimmed in DVI mode.) Adjusts the horizontal size of the screen image (-3 to +3).
Phase: (RGB only; dimmed in DVI mode.) Adjusts image distortion appearing as horizontal noise on the screen (0 to 63).
Auto Position Override: (May be dimmed.) Select DISABLE, 1024x768, 1280x768, 1360x768, or 1366x768. (If the display is distorted or shifted
at a resolution of 1366 x 768, you should adjust the resolution here by manually selecting 1366 X 768.)
at a resolution of 1366 x 768, you should adjust the resolution here by manually selecting 1366 X 768.)
Panel Buttons: Select UNLOCK or LOCK. Locks/unlocks the buttons on the front panel.
PIP: Select Setup for the picture-in-picture. Then select one of the following:
•
PIP Input: Select VIDEO 1, VIDEO 2, or S-VIDEO.
•
PIP Location: Select the PIP position as T/L (top left), T/R (top right), B/R (bottom right), or B/L (bottom left).
•
PIP Size: Select the PIP size as LARGE or SMALL.
•
PIP Options: Select PIP, POP 4:3, POP 16:9, or PIP OFF.
•
PIP Swap: Select SWAP to interchange Main with PIP. (Dimmed in DVI mode.)
NOTES:
•
When using POP 16:9, one image will be 16:9 while the other will be a 4:3 aspect ratio.
•
PIP and POP modes only work with certain inputs. For example, you cannot use a component or DVI subpicture with an RGB as the
main picture.
main picture.
Aspect Ratio: Select 16:9 or 4:3. (Dimmed in DVI mode.)
OSD Setting: Select Setup for the on-screen display. Then select one of the following:
•
OSD H.Position: Adjusts the OSD horizontal position (0 to 100).
•
OSD V.Position: Adjusts the OSD vertical position (0 to 100).
•
OSD Transparency: Adjusts the OSD transparency (0 to 100). The lower the number, the more transparent the menu will become over
the background.
the background.
•
OSD Display Time: Select 5 SEC, 10 SEC, 30 SEC, 60 SEC, or OFF.
Color Temperature: Select 6500 K, 9300 K, or User. If you select User, then select from the following calibrations:
•
R-Gain: Adjusts gain for red (-50 to +50).
•
G-Gain: Adjusts gain for green (-50 to +50).
•
B-Gain: Adjusts gain for blue (-50 to +50).
•
R-Offset: Adjusts the offset (or cut) for red (0 to 100).
•
G-Offset: Adjusts the offset (or cut) for green (0 to 100).
•
B-Offset: Adjusts the offset (or cut) for blue (0 to 100).
•
Reset: Select Restore to return to the original color temperature settings.
Default Setting: Select Restore to return to the default settings.
Information: Select Information to access Pelco headquarters information.