Panasonic BT-LH2170E User Manual

24

25

*

OFF

ON

Displays the center marker.

[OFF]   No marker display

[ON]    Turns the display on

OFF

(H. xxxx V. yyyy)

Displays the cross marker.

[OFF]   No marker display

[(H. xxxx V. yyyy)]  Displays the marker

                           Horizontal (H: 20 to 1899), vertical (V: 20 to 1059) can 

be displayed for any location. When a set value [(H. xxxx  

V. yyyy)] has been confirmed, press the rotary knob 

<PICTURE> again to set horizontal and vertical 

positions.

                          (The factory default is set to H: 480 V: 270.)

WHITE

BLACK

RED

GREEN

BLUE

Selects a marker color.

[WHITE]   white

[BLACK]   black

[RED]      red

[GREEN]  green

[BLUE]     blue

*

4:3

13:9

14:9

CNSCO 2.39

CNSCO 2.35

2:1

VISTA

95% (16:9)

93% (16:9)

90% (16:9)

88% (16:9)

80% (16:9)

USER (16:9)

VAR. (16:9)

95% (4:3)

93% (4:3)

90% (4:3)

88% (4:3)

80% (4:3)

USER (4:3)

VAR. (4:3)

GPI MARKER 1 :  Selects the marker displayed by the GPI terminal 

[MARKER1 ON/OFF] (→page 60) operation.

GPI MARKER 2 :  Selects the marker displayed by the GPI terminal 

[MARKER2 ON/OFF] (→page 60) operation.

[4:3]               4:3 marker

[13:9]             13:9 marker

[14:9]             14:9 marker

[CNSCO 2.39] 2.39:1 marker

[CNSCO 2.35] 2.35:1 marker

[2:1]               2:1 marker

[VISTA]          VISTA marker

[95% (16:9)]    95 % area marker for 16:9 aspect ratio

[93% (16:9)]    93 % area marker for 16:9 aspect ratio

[90% (16:9)]    90 % area marker for 16:9 aspect ratio

[88% (16:9)]    88 % area marker for 16:9 aspect ratio

[80% (16:9)]    80 % area marker for 16:9 aspect ratio

[USER (16:9)]  User set area marker for 16:9 aspect ratio

*

6

[VAR. (16:9)]   VAR. set area marker for 16:9 aspect ratio

*

6

[95% (4:3)]      95 % area marker for 4:3 aspect ratio

[93% (4:3)]      93 % area marker for 4:3 aspect ratio

[90% (4:3)]      90 % area marker for 4:3 aspect ratio

[88% (4:3)]      88 % area marker for 4:3 aspect ratio

[80% (4:3)]      80 % area marker for 4:3 aspect ratio

[USER (4:3)]   User set area marker for 4:3 aspect ratio

[VAR. (4:3)]     VAR. set area marker for 4:3 aspect ratio

*

*

TYPE1

TYPE2

Selects conventional monitor or camera recorder marker size.

[TYPE1]   Conventional monitor marker size

[TYPE2]    Marker size compliant with camera recorder (Panasonic camera)

OFF

LOW

HIGH

Turns the cross hatch grid on and off and sets its density.

[OFF]       No cross hatch grid display

[LOW]      Displays a dim cross hatch grid

[HIGH]     Displays a bright cross hatch grid

SMALL

LARGE

Selects the cross hatch grid size.

[SMALL]   60 dots and 60 lines

[LARGE]   120 dots and 120 lines

*

2

 

These settings are disabled when the GPI (→page 60) function is used to control the marker setting.

*

5

 

Remote control via RS-232C or RS-485 ends in error (error response: ER001) when [GPI MARKER1] or [GPI MARKER2] is se-

lected with the GPI function.

*

6

 

Since video is displayed at 100%, the marker will not be visible if set to [100%].

*

7

 

Display size for SD signals differ.

TYPE1: The effective horizontal area meets the SMPTE ST125 for NTSC and ITU-R BT.601-5 for PAL.

TYPE2: The effective horizontal area meets the EIA-RS170A for NTSC and ITU-R BT.470-4 for PAL.

• Markers other than the CROSS HATCH marker are not available during 2-screen display, PIXEL TO PIXEL mode, and 3D assist 

mode.