Panasonic BT-LH2170E User Manual
34
35
Main Menu
(continued)
Submenu
Setting
Description
(continued from the
previous page)
[TIME CODE]
*
2
Turns the time code display on and off.
[CLOSED CAPTION]
*
2
Turns the closed caption display on and off.
For details on the available operation items, refer to page 37.
[AUDIO MUTE]
Turns the audio MUTE function on and off.
[AUDIO OUT SEL.]
Switches AUDIO output to SDI1 or SDI2 during TWO WINDOW function operation.
[ANAMO]
Turns the ANAMO function on and off.
[TWO WINDOW]
Turns the TWO WINDOW function on and off.
[Y MAP]
Turns the Y MAP function on and off.
[PICTURE ASSIST]
*
1
Turns the PICTURE ASSIST function on and off.
[R COLOR]
*
7
Cuts the red signals.
This button toggles between ON and OFF.
[G COLOR]
*
7
Cuts the green signals.
This button toggles between ON and OFF.
[B COLOR]
*
7
Cuts the blue signals.
This button toggles between ON and OFF.
[ZEBRA]
*
3
Selects the ZEBRA function.
The display changes in the following order.
[ZEBRA OFF]→[ZEBRA INT.]→[ZEBRA EXT.]→[ZEBRA INT.+EXT.]
[ZEBRA LEVEL]
Displays the screen for adjusting the ZEBRA function.
[2D/3D ASSIST]
Switches between 2D and 3D assist mode.
[UNDEF]
Undefined
FUNCTION
DISPLAY
*
8
OFF
ON1
ON2
*
9
Selects display of functions assigned to <FUNCTION1> - <FUNCTION5> (front panel
buttons). It also selects button action (1- touch, 2-touch, off).
[OFF] 1-touch action to perform functions. Functions are not displayed.
[ON1] 1-touch action to display and perform functions.
[ON2] 2-touch action to display and perform functions.
• Pressing the <FUNCTION1> to <FUNCTION5> buttons will not activate FUNCTION operation when the [PICTURE] (picture adjust-
ing) menu has been opened with the rotary knob <PICTURE>.
*
1
The settings are canceled when the power is turned OFF.
*
2
When these settings are changed, the menu settings will also change.
*
3
The control settings do not operate during GPI operation.
*
7
The OFF setting is canceled (ON setting) when the power is turned OFF .
*
8
The operating status is displayed regardless of the ON/OFF setting.
*
9
When set to [ON2], only functions that are displayed can be button operated.
FUNCTION setting restrictions
Under the following conditions, [INVALID FUNCTION] is displayed and the settings cannot be configured.
Setting
Inoperable Condition or Mode
HV DELAY
• SUB WINDOW
• In TWO WINDOW mode
• WFM
• PIXEL TO PIXEL
• 3D ASSIST
• During PC signal input
• When [INT-SG] is selected
BLUE ONLY
In Y MAP ON mode
GAMMA SELECT
• During GPI setting
• During PC signal input
(Continued on next page)