Panasonic BT-LH2170E User Manual
44
45
Main Menu
(continued)
AUDIO
Sets the audio output (a speaker, headphones) and the audio volume bar meter.
Underlined values indicate factory defaults.
Submenu
Setting
Description
INPUT SELECT
AUTO
ANALOG
Selects speaker, headphones output and audio volume bar meter display.
[AUTO] <INPUT SELECT> button on the front panel (→page 12)
When SDI input line is selected:
Embedded audio (SDI terminal)
<INPUT SELECT> button on the front panel (→page 12)
When HDMI input line is selected:
Embedded audio (HDMI terminal)
When an input line other than SDI1, SDI2 or HDMI are selected
with the <INPUT SELECT> button (→page 12) on the front panel:
Analog (AUDIO input terminal)
[ANALOG] Analog (AUDIO input terminal)
GROUP SELECT
CH1 to CH8
CH9 to CH16
Group selection of 16-channel audio using SDI signals.
[CH1 to CH8] Displays channel 1 to 8.
[CH9 to CH16] Displays channel 9 to 16.
SELECT L
*
1
*
2
*
3
*
4
CH1 to CH16
(Factory default: CH1)
Selects embedded audio channels to output to the speaker or headphones
(L).
SELECT R
*
1
*
4
*
5
*
6
CH1 to CH16
(Factory default: CH2)
Selects embedded audio channels to output to the speaker or headphones
(R).
SPEAKER OUT
MIX
L
R
Selects SPEAKER OUT status.
[MIX] Outputs a combination of audio selected with [SELECT L] and
[SELECT R].
[L] Outputs the sound selected with [SELECT L].
[R] Outputs the sound selected with [SELECT R].
LEVEL METER
OFF
ON
Selects whether or not to display the audio volume bar meter. (→page 18)
CH SELECT
*
7
2CH
4CH
8CH
Selects number of audio level meter channels.
• 16 channels cannot be displayed simultaneously.
POINT LINE
OFF
ON
Turns the 0 dB line (reference point) indication on the meter on and off.
CH INFO.
OFF
ON
Switches the channel displayed on the meter on and off.
HEAD ROOM
*
8
12dB
18dB
*
9
20dB
*
10
Sets the display position of the reference point in the meter display.
*
1
When [CH5] to [CH16] is selected during SDI SD signal input:
Switching is performed as follows:
[CH5]/[CH9]/[CH13]→[CH1], [CH6]/[CH10]/[CH14]→[CH2], [CH7]/[CH11]/[CH15]→[CH3], [CH8]/[CH12]/[CH16]→[CH4] (The menu
settings remain as is.)
*
2
During HDMI signal input, CH1 audio is output regardless of the menu setting.
*
3
When analog audio is selected, L audio is output regardless of the menu setting.
*
4
A [SELECT L], [SELECT R] channel display setting is reflected directly after a [GROUP SELECT] change is confirmed.
*
5
During HDMI signal input, CH2 audio is output regardless of the menu setting.
*
6
When analog audio is selected, R audio is output regardless of the menu setting.
*
7
During HDMI signal or analog signal input, [2CH] is displayed regardless of the menu settings. During SD-SDI signal input, the
display becomes [4CH] even if [8CH] is selected in the menu.
*
8
During analog signal input, the reference point is 20 dB regardless of menu setting.
*
9
Factory default setting for the BT-LH2170E.
*
10
Factory default setting for the BT-LH2170P.