Panasonic BT-LH2170E User Manual

8

9

„

„

Power cable x 1 (BT-LH2170P)

Power cable x 2 (BT-LH2170E)

Stand (already attached to the product) x 1

Stand screws (already attached to the product) x 3

CD-ROM x 1

Protection panel mounting screws (8 mm long M3 screws) x 4

• The customer can use these screws for permanent attachment of a protective panel designed for the monitor. (→page 11)

• Tightening torque: Tighten to about 30 N·cm or less

 

After unpacking the monitor, dispose of the AC cord cap (BT-LH2170E only) and packaging material in an appropriate manner.

„

„

• BT-WMA17G wall mount adapter (Leave installation of the wall mount adapter to authorized personnel.)

The BT-LH2170P/BT-LH2170E is a compact, flat panel LCD monitor for broadcast and industrial applications, equipped with a 

54.6  cm (21.5 inch) (effective display area) LCD display.

„

„

This product incorporates a full HD (1920 x 1080) LCD panel.

It offers excellent color reproduction, a wide viewing angle, 

and a fast response time.

„

„

• A 3D Look Up Table (LUT) and a 10-bit image processing 

engine facilitate accurate and smooth gradation from low to 

high brightness levels.

• The inclusion of an I/P conversion circuit with a low delay of 

less than one field minimizes the delay time between signal 

input and monitor display.

• The use of a diagonal line compensation circuit reduces 

image degradation in the vertical direction and jagged noise 

on diagonal lines.

• The high-speed moving image response time provides vivid 

and clear image display.

• Gamma compensation is performed for each monitor.

„

„

Various assist functions are included to allow connecting 

the left and right connectors of a 3D camera to the two SDI 

inputs and capturing 3D images that are easier to view on a 

2D monitor. These functions also make camera adjustments 

easier and reduce the preparation time required for 3D shoot-

ing.

„

„

• Equipped with 3G-SDI, SDI (HD/SD compatible), HDMI, 

VIDEO, and DVI-I  inputs.

• FOCUS-IN-RED function (Displayed abbreviated to F-IN-R 

in the [PICTURE] (picture adjusting) menu.)

Focusing the camera is extremely easy because the area of 

the image in focus is displayed in red to make it easy to see 

what is in focus.

• WFM (Y/R/G/B) and vectorscope display functions

Capable of showing a Y/R/G/B waveform display for input 

signals (3G-SDI, SDI, HDMI, VIDEO, and DVI-I inputs) and 

a vectorscope display (for 3G-SDI and SDI inputs).

• Audio volume bar meter display function

There are level displays for embedded 3G-SDI, SDI and 

HDMI audio signals and analog audio signals. Furthermore, 

support is also included for reference point setting, peak 

hold, and overrange display.

The incorporation of a speaker and a HEADPHONES output 

jack means you can check the audio. There is also a menu 

for selecting channels.

• Closed caption function

The captions added to video signals can be displayed dur-

ing SDI and VIDEO input.

• 2-screen display function

The screen can be split into two to allow you to make a 

screen comparison for the same input connectors and same 

format. (SUB WINDOW function)

It can display two SDI inputs simultaneously in two 

windows. (TWO WINDOW function)

One input signal can be displayed on two windows for 

3G-SDI, SDI, HDMI, VIDEO and DVI-I input VIDEO formats 

in combination with FOCUS-IN-RED, Y MAP, ZEBRA and 

other functions to simplify camera adjustments. (PICTURE 

ASSIST function)

• Cross hatch display function

This function displays markers at regular vertical and hori-

zontal intervals to facilitate easy composition.

• External remote control

RS-485, RS-232C and GPI remote control terminals are 

provided.

A loop-through connection using the RS-485 input and 

output terminals allows control of multiple monitors (up to 32 

monitors).

• IMD (in-monitor display) display

The RS-485 interface allows you to display text and the tally 

indication on the monitor.