Panasonic CY-VH9300U User Manual

10

11

≥ When you leave the car, be sure to eject the SD 

memory card from this unit and bring it out.

≥ Lock the monitor in the fully closed position. 
≥ If the display unit cannot be locked, be absolutely 

sure to consult your dealer and remedy the 
situation.

≥ This unit automatically adjusts the screen 

brightness in accordance with the brightness of 
its surroundings. However, the dimmer sensor 
may not function properly if it is exposed directly 
to sunlight or other strong sources of light. 

≥ The manufacturer will not be liable in any way for 

any incidental damages (such as loss of business 
income or changes or loss of memory data) 
which may result from the use of or failure to use 
this product.

≥ The terms and conditions of the warranty which 

accompanies the product do not apply when the 
product is operated in a vehicle which is used for 
business purposes (such as a bus, taxi cab or 
commercial vehicle).

≥ No guarantees can be made for the numerical 

values which have been set in the product when 
those values have been changed as a result of 
misuse of the product by the user or any third 
party or of the effects of static or electrical noise 
or of malfunctioning or repairs.

≥ The manufacturer will not be liable in any way for 

the loss, destruction or erasure of SD memory 
card data which is a result of improper handling.

≥ Even if your headphones are the open-air type 

designed to let you hear outside sounds, do not 
turn up the volume so high that you can not hear 
what is around you.

≥ Sound can be deceiving. Over time your hearing 

comfort level adapts to higher volumes of sound. 
So what sounds normal can actually be loud and 
harmful to your hearing. Guard against this by 
setting your equipment at a safe level BEFORE 
your hearing adapts. 

  To establish a safe level:
  • Start your volume control at a low setting. 
  •  Slowly increase the sound until you can hear it 

comfortably and clearly, and without distortion.

≥ Once you have established a comfortable sound 

level, set the dial and leave it there.

≥ Do not attempt to adjust the size while wearing 

headphones. (You may fi nd that your hair is pulled 
as it becomes entwined with the headphones.)

≥ There may be breaks in the sound or noise may 

be heard if the headphones are used at a distance 
from this unit (display) or if obstructions block 
the infrared rays. These problems are caused by 
characteristics which are inherent in infrared rays, 
and thus are not indicative of any malfunctioning.

≥ Make sure that the infrared sensor window is not 

covered by your hands or hair.

≥ Since these headphones use infrared rays for 

operation, avoid using them in direct sunlight.

≥ When listening to sound through headphones, 

the volume level is a little lower compared 
with listening to sound which is delivered from 
speakers through an external device.

≥ Storage temperature range: `20 °C to 80 °C
   

{

`4 °F to 176 °F}

  When the liquid crystal panel reaches high 

temperatures or low temperatures, chemical 
changes occur within the liquid crystal panel 
which may cause malfunctions.

≥ Do not strongly impact the liquid crystal panel.
≥ When the temperature is very cold or very hot, 

the image may not appear clearly or may move 
slowly. Also, movement of the image may seem 
to be out of synchronization or the image quality 
may decline in such environments. Note that this 
is not a malfunction or problem.

  Usage temperature range:  0 °C to 40 °C 
   

{32 °F to 104 °F}

≥ There may be red spots, blue spots and green 

spots on the panel surface. This is a characteristic 
of liquid crystal panels and is not a problem. 
The liquid crystal panel is built with very high 
precision technology and has at least 99.99 % 
effective image pixels. Be aware that on 0.01 % of 
the panel there may be missing pixels or constantly 
light pixels.

≥ In order to protect the liquid crystal panel, keep it 

out of direct sunlight while the unit is not in use.

≥ Sudden changes in the temperature inside the car 

such as those which occur immediately after the 
car’s air conditioner or heater has been turned on 
may cause the inside of the liquid crystal panel 
to cloud over due to water vapor or it may cause 
condensation (droplets of water) to form and, as 
a result, the panel may not work properly. Do not 
use the unit while these symptoms are in evidence 
but leave the unit standing for about an hour, and 
then resume or start use.

Spots

Find the model number and serial number on either the back or bottom of the unit. Please record them in the 
space below and retain this booklet as a permanent record of your purchase to help with identifi cation in case 
of theft.