Panasonic BT-LH2170P User Manual

24

25

Underlined values indicate factory defaults.

Switches between 2D mode and 3D assist mode.

[2D]              Operates in 2D mode.

[3D ASSIST]  Operates in 3D assist mode.    

When you switch to [3D ASSIST], the input line selection will be force switched to 

SDI1 or SDI2.

Underlined values indicate factory defaults.

OFF 

*

1

ON

Selects whether to enable or disable the marker setting.

*

*

OFF

4:3

13:9

14:9

CNSCO 2.39

CNSCO 2.35

2:1

VISTA

95%

93%

90%

88%

80%

USER  85%

VAR.  H.  85%  V.  85%

Selects/displays various markers in 16:9 aspect ratio.

[OFF]     No marker display

[4:3]       4:3 marker

[13:9]     13:9 marker

[14:9]     14:9 marker

[CNSCO 2.39] 2.39:1 marker

[CNSCO 2.35] 2.35:1 marker

[2:1]       2:1 marker

[VISTA]  VISTA marker

[95%]     95 % area marker

[93%]     93.1 % area marker (TYPE1)

            93 % area marker (TYPE2)

[90%]     90 % area marker

[88%]     89.5 % area marker (TYPE1)

            88 % area marker (TYPE2)

[80%]     80 % area marker

[USER]   An area marker that is adjustable in 1% increments within a range 

of 80 to 100%. However, when the [MARKER TYPE] is [TYPE1], 

88% and 93% indicate area markers whose height area 89.5% and 

93.1%, respectively.

            (The factory default is 85 %.)

[VAR.]     This area marker can be varied in 1% increments in the range 

between 80 to 100% separately for vertical and horizontal.

            (The factory default is 85% for both vertical and horizontal)

*

*

OFF

95%

93%

90%

88%

80%

USER  85%

VAR.  H.  85%  V.  85%

Selects/displays the marker type for when the angle of view of the displayed 

image is 4:3.

[OFF]     No marker display

[95%]     95 % area marker

[93%]     93 % area marker

[90%]     90 % area marker

[88%]     89 % area marker (TYPE1)

            88 % area marker (TYPE2)

[80%]     80 % area marker

[USER]   An area marker that is adjustable in 1% increments within a range 

of 80 to 100%. However, when the [MARKER TYPE] is [TYPE1], 88 

% indicates an area marker whose height is 89%.

            (The factory default is 85 %.)

[VAR.]     This area marker can be varied in 1% increments in the range 

between 80 to 100% separately for vertical and horizontal.

            (The factory default is 85% for both vertical and horizontal)

*

NORMAL

HALF

BLACK

Selects the background brightness around the marker.

[NORMAL]  Normal background

[HALF]       50% signal level

[BLACK]     0 % signal level (black)

*

1

 

This setting is turned [ON] when receiving marker control signals in REMOTE operation. (GPI if set, has priority.)

*

2

 

These settings are disabled when the GPI (→page 60) function is used to control the marker setting.

*

3

 

These settings are enabled only for HD and SD signal input when [SD ASPECT] is set to [16:9] aspect ratio mode. (→ 28 page “SD 

ASPECT”)

*

4

 

These settings are enabled only for SD signal input when [SD ASPECT] is set to [4:3] aspect ratio mode. (→ 28 page “SD ASPECT”)