Panasonic CX-D3000U User Manual
No.
❐ Installation hardware
❐ Overview
This product should be installed by a professional.
However, if you plan to install this product yourself,
your first step is to decide where to install it. The
instructions in these pages will guide you through
the remaining steps:
(Please refer to the “WARNING” statement above.)
However, if you plan to install this product yourself,
your first step is to decide where to install it. The
instructions in these pages will guide you through
the remaining steps:
(Please refer to the “WARNING” statement above.)
≥
Identify and label the car wires.
≥
Connect the car wires to the wires of the power
connector.
connector.
≥
Check the operation of the product.
If you encounter problems, please consult your
nearest professional installer.
nearest professional installer.
6
Diagram
Item
E
N
G
L
I
S
H
28
Installation Guide
CX-D3000U
37
37
Before you begin installation, look for the items
which are packed with your product.
which are packed with your product.
≥
Warranty Card…Fill this out promptly.
≥
Panasonic Servicenter List for Service Directory
…Keep for future reference in case the product
needs servicing.
…Keep for future reference in case the product
needs servicing.
❐ Required tools
You’ll need a screwdriver, and the following:
Q’ty
4
WARNING
The installation information is designed for experienced installers and is not
intended for non-technical individuals. It does not contain warnings or cautions of
the potential dangers involved in attempting to install this product.
intended for non-technical individuals. It does not contain warnings or cautions of
the potential dangers involved in attempting to install this product.
Any attempt to install this product in a motor car by anyone other than a qualified
installer could cause damage to the electrical system and could result in serious
personal injury or death.
installer could cause damage to the electrical system and could result in serious
personal injury or death.
1
2
3
4
5
Tapping screws
(5 mm
(5 mm
·k16 mm)
Binding-Head Screws
(M5
(M5
k6 mm)
4
2
1
1
L-shaped brackets
Power connector
(5 m)
(5 m)
Clamp connector
1
1
1
Caution:
≥
This product operates with a 12 V DC nega-
tive ground auto battery system only. Do not
attempt to use it in any other system. Doing
so could cause serious damage.
tive ground auto battery system only. Do not
attempt to use it in any other system. Doing
so could cause serious damage.
12 V DC
test bulb
Electrical
tape
Side-cut
pliers
Cord clamp
RCA cord
(3 m)
(3 m)
7
Double-sided tape
8