Panasonic BT-LH1850E User Manual

12

13

Power cable

„

„

You can slide open the power cover to switch from AC input to 

external DC input.

Power cover

• If the power cover has come off or been removed, do not use 

the monitor with the power supply connected to both AC input 

and DC input terminals.

• Use a shielded DC cable that is not longer than 2 m. A cable 

that is 2 m or longer may cause noise.

If an external DC power supply is used, be sure to check that 

the  rating  of  the  external  DC  power  supply  suits  the  power 

requirements of this unit.

When using external DC power (12 V DC), check the external 

DC input terminal pin signal, and use the correct polarity. If 

a +12 V power supply is accidentally connected to the GND 

terminal, this could cause a fire or personal injury.

1

GND

2, 3

―

4

+12 V

Move the unit in the direction of the arrows to adjust it to a comfortable viewing position.

Forward

Backward

• The tilt stand allows you to tilt the unit approx. 10 degrees forward and approx. 15 degrees backward.

External DC input terminal

1

2

3

4