Pelco TW300IP Leaflet
C1664M-B (1/06)
TW3001P Passive Single-Channel
Video Transceiver
TW3001P Passive Single-Channel
Video Transceiver
®
The TW3001P video transceiver is a passive (no power required) single-channel balun that sends full motion video
(color/black-white) and Coaxitron
(color/black-white) and Coaxitron
®
PTZ control signals over a single unshielded twisted pair (UTP) cable.
Two TW3001Ps or one TW3001P with a transceiver or active receiver are required for transmission over a single
UTP cable. The TW3001P is compatible with all Pelco twisted pair equipped cameras, enclosures, and domes.
UTP cable. The TW3001P is compatible with all Pelco twisted pair equipped cameras, enclosures, and domes.
NOTE:
Cat5e cable is recommended for optimum video performance.
Figure 1.
TW3001P Basic Applications
Cable Type
Distance (with Coaxitron)
Distance (video only)
Cat3
300 ft
400 ft
Cat5
500 ft
650 ft
Cat5e
750 ft
750 ft
Cat6
750 ft
750 ft
Wire Gauge (maximum allowable)
Single Wire (solid)
16 AWG (1.5 mm
2
)
Stranded Wire (flexible)
18 AWG (1.0 mm
2
)
TW3001P
MONITOR
TW3001P
MONITOR
SPECTRA
TW3001P
UTP
UTP
MONITOR
UTP
COAXITRON
VIDEO
VIDEO
VIDEO
CAMCLOSURE
+
-
+
-
10 PINS (5-/6+)
8 PINS (4-/5+)
PIN 5 +
PIN 4 -
FIXED CAMERA
DIRECT
CONNECTION
DIRECT
CONNECTION
DIRECT
CONNECTION
NOTE: A TW3001P CAN BE CONNECTED DIRECTLY INTO CAMERAS THAT DO NOT HAVE AN RJ-45 CONNECTOR.
UTP CAMERAS HAVE A10-PIN RJ-45 CONNECTOR. STANDARD RJ-45 CONNECTORS HAVE 8 PINS.
UTP CAMERAS HAVE A10-PIN RJ-45 CONNECTOR. STANDARD RJ-45 CONNECTORS HAVE 8 PINS.
BLUE WIRE =
GRAY WIRE =
MATRIX
VC-UTP BOARD