Sharp PN-K322B User Manual

14

E

n

The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp.

Attach the cable clamps to the attachment parts on the back of the monitor and the stand, and bind the cables.

Cable clamp

Cable clamp 

attachment

Cable

Cable clamp (small)

Cable clamp 

attachment

Cable

Cable clamp (large)

Cable clamp 

attachment

Cable

n

After you have secured the cables connected to the back of the monitor with the cable clamp, you can store the cables in the 

cable cover.

The cable cover 

is attached by 

hanging from the 

hooks

Slightly lift the cable cover, 

and with the tab clear of 

the hole, move up and 

remove

The tab inserts 

into the hole to 

hold the cable 

cover

Caution

•  Do not forcibly bend or apply force to the cables. Risk of wire breakage or other damage.

•  When attaching the cable cover, do not pinch the cables.

•  Arrange the cable to allow for use with the monitor slid to the bottommost position (about 25° from horizontal).