Sharp PN-K322B User Manual
35
E
Specifications
n
Product Specifications
Model
PN-K322B
LCD component
32" Class [31-35/64 inch (80.1cm) diagonal] TFT LCD
Max. resolution
(pixels)
3840 x 2160
Max. colors
Approx. 1.07 billion colors
Pixel pitch
0.182 mm (H) × 0.182 mm (V)
Viewing angle
176° right/left/up/down (contrast ratio ≥ 10)
Screen active area
inch (mm)
27-31/64 x 15-15/32 (697.9 x 392.6)
Response speed
8 ms (Gray to Gray, avg.)
Plug and play
VESA DDC2B
Power management
VESA DisplayPort
Input terminals
PC/AV
HDMI x 2
PC
DisplayPort x 1
Audio
3.5 mm mini stereo jack x 1
Serial (RS-232C)
3.5 mm mini jack x 1
Output terminals
Audio
3.5 mm mini stereo jack x 1
Speaker output
2 W + 2 W
Touch Panel
Touch screen system
Capacitive
USB (for touch panel
communication)
x1, USB (mini-B)
Maximum touch points
10 points
Power requirement
AC 100 V - 240 V, 50/60 Hz (when using the supplied AC adapter)
Operating temperature
41°F to 95°F (5°C to 35°C)
Operating humidity
20% to 80% (no condensation)
Power consumption
(input signal waiting mode
*
1
/ standby mode)
97 W
*
2
(7.2 W / 7.2 W) (when using the supplied AC adapter)
Dimensions (excluding protrusions)
inch (mm)
Monitor only
Approx. 29-17/32(W) x 1-27/64(D) x 17-3/8(H) (750 x 36 x 441)
Monitor on supplied stand
• Monitor screen angle 90° (from horizontal)
Approx. 29-17/32(W) x 15-23/64(D) x 19-27/64(H) (750 x 390 x 493)
•
Monitor screen angle 25° (from horizontal)
Approx. 29-17/32(W) x 22-41/64(D) x 8-5/32(H) (750 x 575 x 207)
Weight
lbs. (kg)
Approx. 19.9 (9.0) (monitor only)
Approx. 35.3 (16.0) (monitor on supplied stand)
*1 When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 1.3 W
*2 When using the monitor in DC19.5 V : 91 W
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.