Sharp PN-Y325 User Manual

39

E

You can control the monitor using RS-232C commands 

(see page 36) via terminal software and other appropriate 

applications.

Read the manual for the terminal software for detailed 

instructions.

1.  Specify the IP address and data port number (fixed at 

“10008”), and connect the PC to the monitor. 

When connection has been established successfully, 

[ Login:] is returned as response.

2.  Enter the user name and password.  

(The default settings are blank.)

•  The commands used are the same as those for RS-

232C. Refer to the communication procedure (see 

page 32) for operation.

•  Usable commands are provided in the RS-232C 

command table (see page 36).

1.  Send [BYE ]. 

When the transmission is successful, [goodbye] is 

returned and the connection is disconnected.

TIPS

•  The connection is automatically disconnected if there is no 

communication for about 5 minutes.