Sharp PN-Y475 User Manual

12

E

Caution

•  Be sure to turn off the main power switch and disconnect 

the plug from the power outlet before connecting/

disconnecting cables. Also, read the manual of the 

equipment to be connected.

•  Be careful not to confuse the input terminal with the output 

terminal when connecting cables. Accidentally reversing 

cables connected to the input and output terminals may 

cause malfunctions and the other problems.

•  Do not use any cable that has a damaged or deformed 

terminal. Using such cables may cause malfunctions.

TIPS

•  Images may not be displayed properly depending on the 

computer (video card) to be connected.

•  Use the automatic screen adjustment when a PC screen is 

displayed for the first time using D-SUB, or when the setting 

of the PC is changed. The screen is adjusted automatically 

when AUTO in the SCREEN menu is set to ON.

•  If the audio output from the playback device is connected 

directly to speakers or other devices, the video on the 

monitor may appear delayed from the audio portion. 

Audio should be played through this monitor by connecting 

the playback device to the monitor’s audio input, and 

connecting the monitor’s audio output to the speakers or 

other devices.

•  The audio input terminals used in each input mode are 

factory-set as follows.

DVI-D

Audio1 input terminal

HDMI[PC], HDMI[AV]

HDMI input terminal /  

Audio1 input terminal

D-SUB[RGB]

Audio1 input terminal

D-SUB[COMPONENT],

D-SUB[VIDEO]

Audio2 input terminals

USB

USB port

•  Use a commercially available HDMI cable (conforming to 

the HDMI standard).

•  Set HDMI of INPUT SELECT on the SETUP menu 

according to the device to be connected.

•  Use a commercially available signal cable (DVI-D 24 pin).

•  Set D-SUB of INPUT SELECT on the SETUP menu 

according to the device to be connected.

•  Connect a USB flash drive to the USB port.

•  Do not connect a USB device other than a USB flash 

drive.

•  Turn off the power of the monitor when removing a USB 

flash drive.

•  After you have connected a USB flash drive, create “data.

db” and “db.info” in the root folder.

File System

FAT32

Capacity

Up to 32 GB  

(maximum file size 2 GB)

  •   Do not use a USB flash drive with a security function or 

a write protection function.

  •   Use a USB flash drive with a shape that can be inserted 

in the USB port. Some USB flash drives with special 

shapes cannot be inserted. Do not forcibly insert a USB 

flash drive. This may damage the connector and cause 

failure.