Sharp PN-E603 User Manual

53

E

You can control the monitor using RS-232C commands 

(see page 36) via terminal software and other appropriate 

applications.

In order to use this function, enable a connection to the 

monitor through Internet Explorer.

Read the manual for the terminal software for detailed 

instructions.

1.  Specify the IP address and data port number and 

connect the PC to the monitor. 

When connection has been established successfully, 

[ Login:] is returned as response.

2.  Send the user name set in the SECURITY settings (see 

page 49).

•  Send [User name] + [ ].

•  If the user name is not set, send [ ].

•  When the transmission is successful, [ Password:] 

is returned as response.

3.  Send the password set in the SECURITY settings (see 

page 49).

•  Send [Password] + [ ].

•  If the password is not set, send [ ].

•  When the transmission is successful, [OK  ] is 

returned as response.

•  The commands used are the same as those for RS-

232C. Refer to the communication procedure (see 

page 33) for operation.

•  Usable commands are provided in the RS-232C 

command table (see page 37).

1.  Send [BYE ]. 

When the transmission is successful, [goodbye] is 

returned and the connection is disconnected.

TIPS

•  Connection is automatically disconnected when the 

time specified in AUTO LOGOUT TIME elapses over a 

no-communication period.