Sharp LL-P202V User Manual

Spare pen tip storage

The pen stand features a pen tip storage area where you can

store spare pen tips.

TIPS

• Spare pen tips are not stored in the stand at the time of

purchase. Store the spare pen tips in the pen stand to

make sure you do not lose them.

1. Remove the spare pen tip storage cap.

Cap

Pen tip storage

2. Insert the spare pen tips into the holes in the pen tip

storage.

3. Reattach the cap.

Replacing the digitizer pen tip

Replace the pen tip when it is worn or damaged. Using the

digitizer pen with a worn or damaged pen tip may scratch the

surface of the monitor, or may cause the digitizer pen function

to stop operating. Pen tips will wear with normal use.

Replace

when worn

down to

this level.

1. Unscrew the pen tip cover and remove it.

2. Pull out the pen tip.

3. Insert a new pen tip, and reattach the pen tip cover.

Other functions

In Windows 8.1/8, input panel functions can be used.

In Windows 7, touch pointer and input panel functions can be

used.

For information about the touch pointer and input panel

functions, see Windows Help.

Touch pointer :

A translucent image of a mouse appears near the point

touched. The left/right buttons of the image can be clicked

to perform the same actions as left/right clicking a mouse.
Input panel :

A software keyboard and an input panel with handwriting

recognition appear on the screen.

Windows 8.1/8 and Windows 7 (excluding Starter), the ink

function of Microsoft Office can be used.

Handwritten comments can be written, and handwriting can

be recognized using this function.

For details, see Microsoft Office Help.

Cautionary points

• When performing touch actions, use the ball of your finger.

• Use only the supplied digitizer pen or touch pen to perform

pen actions.

• Do not use the supplied pen (digitizer pen or touch pen) for

any purpose other than touch panel operation.

• Do not press hard on the tip of the digitizer pen or touch

pen.

• If there is dirt or foreign matter on the tip of the digitizer pen

or touch pen, remove it. Failure to do so may damage the

screen.

• Even when in pen-only mode, the unit may respond to

objects other than the supplied digitizer pen or touch pen.

• When performing pen actions with the supplied digitizer

pen or touch pen, do not touch the screen with anything

other than the hand that is holding the pen.

Touch Action