Kenwood DDX419 User Manual

English

•  DO NOT install any unit or wire any cable in 

a location where;
–  it may obstruct the steering wheel and 

gearshift lever operations.

–  it may obstruct the operation of safety 

devices such as air bags.

–  it may obstruct visibility.

•  DO NOT operate the unit while driving. 
  If you need to operate the unit while 

driving, be sure to look around carefully.

•  The driver must not watch the monitor 

while driving.

•  The monitor built in this unit has been 

produced with high precision, but it 
may have some ineffective dots. This is 
inevitable and is not considered defective.

•  Do not expose the monitor to direct 

sunlight.

•  Do not operate the touch panel using a 

ball-point pen or similar tool with the sharp 
tip.

  Press the buttons on the touch panel with 

your finger directly (if you are wearing a 
glove, take it off ).

•  When the temperature is very cold or very 

hot...
–  Chemical changes occur inside, causing 

malfunction.

–  Pictures may not appear clearly or 

may move slowly. Pictures may not 
be synchronized with the sound or 
picture quality may decline in such 
environments.

•  Do not raise the volume level too much, 

as this will make driving dangerous by 
blocking outside sounds, and may cause 
hearing loss.

•  Stop the car before performing any 

complicated operations.

If you have parked the car for a long time 
in hot or cold weather, wait until the 
temperature in the car becomes normal 
before operating the unit.

Reset button

Reset button

 

If the unit fails to operate properly, press 
the Reset button. The unit returns to factory 
settings when the Reset button is pressed 
(except the registered Bluetooth devices).

How to read this manual:
•  Illustrations of DDX719 are mainly used for 

explanation.

•  This manual mainly explains operations 

using the buttons on the monitor panel 
and touch panel. For operations using the 
remote controller (RC-DV340: supplied 
only for DDX7049BTX/DDX4049BT/
DDX3049), ☞ page 63.

•  < > indicates the variable screens/menus/

operations/settings that appear on the 
touch panel.

•  [ ] indicates the buttons on the touch 

panel.

•  Indication language: English indications 

are used for the purpose of explanation. 
You can select the indication language 
from the <Setup> menu. (☞ page 51)

 

The displays and panels shown in this 
manual are examples used to provide 
clear explanations of the operations. For 
this reason, they may be different from the 
actual displays or panels.

EN_LVT2268-001A_KR.indb   3

EN_LVT2268-001A_KR.indb   3

11/11/22   13:49

11/11/22   13:49