Kenwood DDX2071 Owner's Manual

ENGLISH

31

OTHER EXTERNAL COMPONENTS

When the operation buttons are 

not displayed on the screen, touch 

the area shown on the illustration.

You can connect an external component to the 

AV-IN1 and iPod/AV-IN2 input terminals. (Page 56  )
Preparation:

If you want to use “AV-IN2”, select [AV-IN2] for <AV 

Input> setting. (Page 47)

•  No preparation is required for “AV-IN1”.

AV-IN name

Changes the AV-IN name.

•  Press [ ] or [ ] to select an AV-IN 

name.

•  This setting does not affect the 

source name “AV-IN 1”/ “AV-IN 2” 

displayed on <Top Menu>.

Displays the <Top Menu> screen.

  Connect an external component to the 

AV-IN1 and iPod/AV-IN2 input terminals.

 Select 

“AV-IN1” or “AV-IN2”as the source. 

(Page 9)

  Turn on the connected component and 

start playing the source.

•  To use a rear view camera, a REVERSE lead 

connection is required. (Page 55  )

  Display the <Input> setting screen.

On the <Top Menu> screen:

 

To deactivate: Select [Off] for <R-CAM Interrupt>.

The rear view screen is displayed when you shift the 

gear to the reverse (R) position.

•  To erase the caution message, touch the screen.
 To display the picture from the rear view camera 

2

1

(Hold)

(Hold)

(Hold)

1

 

 

•  When displaying the picture from the rear view 

camera manually, you can change the setting 

of the picture using [Zoom]/[Aspect]/[Adjust]. 

(Page 41)

To exit the rear view screen: Press and hold the 

same button again.

*

1

  This operation works only when <AUD Key Long Press> is 

set to [R-CAM]. (Page 48)

*

 2

  This operation works only when <TEL Key Long Press> is 

set to [R-CAM]. (Page 48) 

DDX_Entry_K.indb   31

2013/11/01   16:10