Sony NSR-1050H User Manual

NSR-1000 Series v1.1.1 Release Note

・

You can select only the one check box in the search results list. Playback is
enabled for the selected search result. Exporting is enabled for the selected
search result, too. You can protect /unprotect the recordings if their background
is turned into blue with the check box selected. (VT1:2163)

３-１０ Device Configuration

This section describes precautions on use of camera or setting. For other restrictions or
precautions, refer to the User’s guide or release note for the camera.

・

In case of using an alarm output function of the camera, enable its setting of
the camera using Internet Explorer (Web browser) in advance(VT1:2037)

・

Regarding following cameras, when user uses the VMD (Camera), codec setting
shall be set as MPEG4. (VT1:1866)
SNC-RZ25, SNC-P5, SNC-CS10, SNC-CS11, SNC-P1, SNC-DF70, SNC-DF40

・

When the video format is configured as PAL for the NSR-1000 Series with
NSBK-A16 for analog camera, please notice that the frame rate settings are
converted to following settings, practically. (VT1:1804)

Actual frame rate

Configured
frame rate NTSC PAL
1 1

3 3

3.12

5 5

10 10

8.33

15 15

16.66

20 20

25 25

30 30

N/A

Note: As described in

３

-３, total frame rate is limited. When using PAL

cameras, internal frame rate for calculation is different from the setting as
described above. When configuring a system, please calculate with the

- 11 -