Sony NSR-1050H User Manual

Page of 46
NSR-1000 Series v1.1.1 Release Note 
registration. (V11N:461) 
 
-11 Action Configuration 
・ 
N/A 
 
-12 Schedule Configuration 
・ 
If user sets the schedule record of following cameras with the ‘Automatic 
Record Configuration’, the codec setting shall be not MPEG4 but JPEG. If user 
needs to change the setting, please select the codec on ‘Video’ tab in the Device 
menu. (VT1:1690) 
SNC-CM120, SNC-CS20, SNC-DF85, SNC-DM110, SNC-DM160, SNC-DS10, 
SNC-DS60 
 
・ 
If user changes the ‘Storage Setting’ of the camera during recording, new 
storage setting has not been available for recording. Following steps are 
recommended to change the storage setting. (VT1:1646) 
1.  Disable the schedule setting. (Uncheck ‘Enable’ check box on the top of the 
schedule configuration window) 
2.  Change ‘Storage Setting’   
3.  Enable the schedule setting. (Check ‘Enable’ check box on the top of the 
schedule configuration window)   
 
・ 
If user enables audio setting to the camera during recording, it is not available 
to record audio of it. It is necessary to enable audio setting before starting to 
record in order to record audio. (VT1:1643) 
 
・ 
If user adds the camera to the existing schedule, the ‘recording cameras box’ 
may be blank. In this case, this recording schedule is not available. It is 
necessary to reacquire settings of cameras with the ‘Adjust to camera 
configuration’ button. (VT1:1441) 
 
・ 
If user changes the system time during recording, the time of recorded data 
shall change with this change. There may be problems that the duration 
- 15 -