Sony NSR-1050H User Manual
NSR-1000 Series v1.1.1 Release Note
４-１-６ Alarm Notification / Alarm History
・
If user tries to play back the camera with double-clicking alarm history during
playing back it on the other monitor frame, the NSR-1000 Series cannot start to
play back and live image is displayed. Please make sure that the camera is not
played back on other monitor frames when user starts to play back it.
(VT1:1687)
playing back it on the other monitor frame, the NSR-1000 Series cannot start to
play back and live image is displayed. Please make sure that the camera is not
played back on other monitor frames when user starts to play back it.
(VT1:1687)
・
When configuring the alarm recording triggered by other device than a camera,
like the sensor inputs in NSR or Barionet , you can see the trigger name only in
the alarm history even when alarms occurred. (No camera name is displayed.)
In addition, the recorded image cannot be played back by double-clicking each
alarm history. To playback, search the desired record and play it from the
search results. (V11N:253, V11N:257)
like the sensor inputs in NSR or Barionet , you can see the trigger name only in
the alarm history even when alarms occurred. (No camera name is displayed.)
In addition, the recorded image cannot be played back by double-clicking each
alarm history. To playback, search the desired record and play it from the
search results. (V11N:253, V11N:257)
４-１-７ Search Window
・
If user searches again, recorded data which has been deleted may be displayed
on the ‘Timeline Result’ shortly after the deletion. In this case, that deleted
data does not appear after searching again. (VT1:1916)
on the ‘Timeline Result’ shortly after the deletion. In this case, that deleted
data does not appear after searching again. (VT1:1916)
・
The Previous Frame and Next Frame button on Playback Control Pane of
Search window control the selected monitor frames.(VT1:1757)
Search window control the selected monitor frames.(VT1:1757)
４-１-８ Device Configuration
・
The NSR-1000 Series registers cameras as PAL right after registration even if
these cameras only have NTSC mode. In this instance, the frame rate list of the
camera is same as the list of PAL. If user once displays live image of the camera
on the configuration window or Main GUI, the NSR-1000 Series identifies
appropriate video format as either NTSC or PAL and updates the list.
(VT1:1251)
these cameras only have NTSC mode. In this instance, the frame rate list of the
camera is same as the list of PAL. If user once displays live image of the camera
on the configuration window or Main GUI, the NSR-1000 Series identifies
appropriate video format as either NTSC or PAL and updates the list.
(VT1:1251)
・
If analog video data is input to the NSR-1000 Series via NSBK-A16, 0.25fps /
0.33fps / 0.5fps can be selected from the list of frame rate. But these settings
are available when codec setting is only MPEG4(I frame). When MPEG4 is
0.33fps / 0.5fps can be selected from the list of frame rate. But these settings
are available when codec setting is only MPEG4(I frame). When MPEG4 is
- 22 -