The upper line is the menu title (as shown
here) or a text describing a submenu or
the setting shown (as in the example to
the right). The settings available can be
displayed one by one (the upper line is
retained) by scrolling up and down.

Press

Enter

to produce the menu. The display

shows two lines at a time:

IP Address
010.047.005.282

Press

Enter

to edit the address.

The first digit will now blink.
Use the

Arrow

keys to scroll through the

numbers (0–9) and press

Enter

when the

number requested appears. The next digit will
then start to blink.
Repeat until the final digit has been set.

Press

Enter

to enter the submenu:

Press

Enter

to bypass any digit not in need of

adjustment.
When all digits have been set pressing

Enter

will

produce the Save Changes menu.
Use

Arrow

keys to select applicable option.

Use

Enter

to exit the menu putting changes

into effect.This will take you back to the
IP Settings menu.
If you need to change other settings repeat the
procedure selecting the applicable IP Setting

submenu (e.g. Default Gateway) first.
Use

Return

to leave a menu undoing any changes.

This will also take you back to the IP Settings menu.

Selecting IP Settings > IP Address









Examples on Front Panel Operation

Installing the Content Server

Use the

Arrow

keys to scroll up
and down and
have the settings
shown displayed
one by one. The
menu title will be
retained.

The IP Settings has six submenus. Use the

Arrow

keys to locate IP Assignment

IP Settings
IP Assignment

IP Address
Subnet Mask
Default Gateway
DNS (Preferred)
DNS (Alternate)

Example 1: Setting the IP Assignment

Main Menu
IP Settings

Press

Enter

to produce the menu. The display

shows two lines at a time:

Use the

Arrow

keys to scroll down to Static.

Press

Enter

to put the change into effect and

proceed to specify the IP address.

Press

Enter

to enter the submenu:

Selecting IP Settings > IP Address







Select Type:
DHCP

Static

Set the IP Address to Static!

We strongly recommend that you change the
IP address from DHCP to Static once the
Content Server is in production.
Use the examples on this page together with
the diagram on the previous page to set the IP
address.
To set the Subnet mask, Default gateway and
DNS IP addresses, follow the steps described
in Example 2 : Setting the IP address.