Furuno MU-190 User Manual

You can install the monitor unit as follows. See the outline drawings at the back of this manual for 
mounting dimensions.

•  Flush mount, fixed at front (standard)
•  Flush mount, fixed at front, with hood (option)
•  Flush mount, fixed at rear (option)
•  Flush mount, fixed at rear, with hood (option)
•  Tabletop mount (option, hood-mountable)
•  Flush mount a series side by side, fixed at rear

Note 1: The face of the LCD is made of glass. Handle it with care.

Note 2: For flush mount, take care so that the monitor unit does not fall during the installation.

Select a mounting location considering the following points. This equipment is free from electro-
magnetic fields.

•  Make sure the mounting location is strong enough to support the weight of the unit.
•  Locate the unit away from direct sunlight. An LCD may darken if it is exposed to direct sunlight 

for a long time.

•  Select a location where the screen can be easily viewed and the controls can be easily operat-

ed.

•  Leave enough space around the unit for service and maintenance. See the outline drawings at 

the back of this manual for minimum service clearance.

•  Locate the unit away from areas subject to water splash and rain.
•  Observe the compass safe distances (see page iii) to prevent interference to a magnetic com-

pass.

Run all cables before you install the monitor unit. See the interconnection diagram at the back of 
this manual.